How JNA Sparkle works?
It is easy to use.

For Mirror, Glass or Plastic, follow this 2 steps:

  1. Spray JNP Sparkle
  2. Wipe it with regular paper towel

For Jewelry & Precious Stones,
follow these 4 steps: 

1.Open JNA Sparkle bottle and pour a little into a small container
2. Soak your item in the small container 2 to 3 minutes.
3. Remove item and brush completely and gently with a toothbrush.
4. Rinse thoroughly with water then dry.
NOTE: Do NOT throw away the solution you just used, it is re-usable.

How JNA Sparkle Professional Metal Polish works?

It is easy to use.

Directions: For Rings, Necklaces, Jewelry, or any other Metal items…Even Guns!

STEP 1.  Open The Jar of JNA Sparkle Metal Polish and put a Small Dab of the Cream on Your Finger Tip.
STEP 2. Apply the Cream Directly to the Metal item or Apply it on a Paper Towel.
STEP 3. Rub the Item on the Paper Towel Until Scratches Are Gone. Depending on the Severity of the Blemishes this Could Take up to 90 Seconds
Check Results After Each 4 Passes, Until Desired Effect is Achieved.
NOTE: For best Results use Bounty Paper Towels, Use Couple of Them to Make it Soft Underneath.
STEP 4. Take Another Paper Towel and Remove the Remanent Oil From the all parts of the Item.
STEP 5. Spray or Dip the Item with JNA Sparkle Liquid Cleaner. You May Also Prefer to Soak Your item in the Cleaner for 1 Minute.
STEP 6. Using a Toothbrush, Brush the complete Surface in Order to Remove Remaining Dirt and Grime From in Between the Small Crevices and Seams of the Item.
STEP 7. Rinse the Item with Water and Dry with Paper Towel.

You can use JNA Sparkle Professional Metal Polish on Gold & Sterling Silver, Platinum & Rhodium, Brass & Copper, Aluminum & Chrome, Nickel & Stainless Steel, Tungsten & Titanium, Jewelry and Watches, Silverware & Tea Sets, Motorcycles & Boats, Guns & Knives, Golf clubs & Fishing Tackle or Wood & Ceramic Tiles.

DEMONSTRATION
Using JNA Sparkle Professional Metal Polish
On an Older Watch

The Watch Face Distorted and Dirty

The Watch Band is Pitted, Scratched, and Dirty.

STEP 1 .  Open The Jar of JNA Sparkle Metal Polish and put a Small Dab of the Cream on Your Finger Tip.

Step 2: Apply the Cream Directly to the Watch Band or Apply it on a Paper Towel.
NOTE: For best Results use Bounty Paper Towels, Use Couple of Them to Make it Soft Underneath.

Step 3: Rub the Watch on the Paper Towel Until Scratches Are Gone. Depending on the Severity of the Blemishes this Could Take up to 3 Minutes
Check Results After Each 4 Passes, Until Desired Effect is Achieved,

Step 4: Take Another Paper Towel and Remove the Remanent Oil From the Watch Band and Face.

Step 5: Spray or Dip the Band with JNA Sparkle Liquid Cleaner. You May Also Prefer to Soak
the Band in the Cleaner for 1 Minute.

Step 6: Using a Toothbrush, Brush the complete Band in Order to Remove Remaining Dirt and Grime From in Between the
the Small Crevices and Seams of the Band. Also, Brush Around the Exterior of the Face and Setting Controls for The Watch.

Step 7: Rinse the Item with Water and Dry with Paper Towel.

Final Results:  Watch Looks Completely Brand New Again!!

With JNA Sparkle Professional Metal Polish you can remove:

Tarnish on Metals – Surface scratches on metals – Water Marks & Ink on furniture – Verdigris on antiques – Scuff marks on floors – Rust & corrosion on metals

Burn Marks on appliances – Rust on enamel and porcelain – Paint spots on metals/glass – Water marks on granite/marble – Road film on glass/metal – Rosin from violins